Mike Holmes – Roofing Images, (Manual)

/0 Comments/in , , , /by

Mike Holmes – Roofing Images, (Manual), 2012

Newly added To Portfolio, Mike Holmes – Roofing, Manual, Created for The Holmes Group. Technical Illustration. Architectural Construction.

Below I’ve posted a small number of illustration I did for an illustrated home manual (I’ll post some more in the future) These Illustrations were to be kept simple, on a white background and the text kept as legible as possible as the images were going to be used in many different formats. Quite often the images were to be placed fairly small so it was imperative that the outlines and text maintain their qualities so the viewer wouldn’t lose any information.

Technical Illustrator

 

Technical Illustrator

Above is an illustration showing roof vents and the purpose they serve. Roof vents are used to circulate air, keep the temperature in your attic mildly cool, protecting the climate inside your house and preventing ice dams from forming on top of your roof.

Speaking of which, the ice Damming Illustrations showing both ventilated and non-ventilated were featured in the February 2013 On The Go magazine which accompanied the Mike Holmes article titled “Ice Dams & Your Roof”

 

 

Technical Illustrator

 

Quite often the images were to be placed fairly small so it was imperative that the outlines and text maintain their qualities so the viewer wouldn’t have to compromise on information.

 

 

 

 

Below is an excerpt from the article on Ice Damming –

“Ice dams prevent water from flowing down. It will eventually back up, finding its way under the shingles and into the attic. A thick ice dam can damage roof flashing, fascia and soffits. It can even shift vent stacks and create gaps that allow water into your roof. that water can flow into your exterior wall cavities and end up in your basement. Or it can leak into your home and cause damage to walls, ceiling and insulation”

-Mike Holmes, On The Go Magazine, February 2013

holmesonthego2

 

Biomimicry, Armadillo Lizard ATV

/0 Comments/in , , , , , /by

Biomimicry, Armadillo Lizard ATV, 2010

Newly added To Portfolio, Biomimicry, Armadillo Lizard ATV, Created for Sheridan College. Technical Illustration. Scientific Illustration. Automotive Illustration. 3D.

This project was created for Sheridan College in 2010, it focused on the term Biomimicry. “The design and production of materials, structures, and systems that are modelled on biological entities and processes”. Based on this term I was tasked to come up with an idea that borrowed from biological life. Originally I had the idea to utilize an electric eels natural defense, the electric shock which can generate up to 600 volts of electricity. I wanted to convert this energy into horsepower somehow but couldn’t get past the numbers needed to compete with similar vehicles of its kind.

Technical Illustrator

This project focused on the term Biomimicry. “The design and production of materials, structures, and systems that are modelled on biological entities and processes”.

Technical Illustrator

After compiling all that data I decided to scrap the entire idea in favor of something a little more visual. I began researching other biological entities that I could still apply to a motorized vehicle and then came across the Armadillo Lizard. This lizard interested me specifically because of it’s main defensive against predators. “This heavily armoured reptile is named after the armadillo for its ability to roll itself into an almost impregnable ball when threatened. In this position, the spiny scales covering the neck, body and tail are presented to any potential predator, protecting the soft belly” -Arkive.org

 

“This heavily armoured reptile is named after the armadillo for its ability to roll itself into an almost impregnable ball when threatened”.

Technical Illustrator

Technical Illustrator

I came to the conclusion that this would be a great idea for a new tire that would work really well for an off road type of vehicle, so I began drawing up concepts of an ATV. I started with a few side profile sketches to get some ideas flowing quickly, Once I had something I was interested in, I would take it to the next step by drawing it in 3 dimensions. This would enable me to see how the machine would look and flow in a more realistic space. I treated both the body of the machine and the tire treads as one entity so as to create better flow between the two.

 

“I started with a few side profile sketches to get some ideas flowing quickly, Once I had something I found interesting I would take it to the next step by drawing it in 3 dimensions. This would enable me to see how the machine would look and flow in a more realistic space”.
 

 

Technical IllustratorI worked mainly from my own reference sketches to create the finished ATV and tire. Taking the profile sketches into 3 dimensions was probably the most crucial piece because that was where I began to see how everything was going to fit together. From this I was able to create the 3D model without running into too many unforeseeable problems and saved quite a bit of time creating the final piece.

“Taking the profile sketches into 3 dimensions was probably the most crucial piece because that was where I began to see how everything was going to fit together”.

 

 

 

 

More images for this project can be found in my portfolio under, Biomimicry, Armadillo Lizard ATV

Technical Illustrator